Made of Borosilicate glass. Fit with thermometer or tubing. With 24/40 inner joint. Made by hand blowing. With a compression a cap. With a compression cap accomodates 5. 0-7. 5mm O. D. Thermomter use it as a syringe port. With 24/40 standard taper inner joint, can be fit for any apparatus with 24/40 outer joint.

Eisco Labs Clamp Retort, 3 PVC Coated Prongs opens to 90mm in dia. with Boss Head

Pvc coated jaws open to 3. 5" or 90mm. Can mount vertical or horizontal -- rotates on clamp. Die casted alloy clamp retort, PVC coated jaws with boss head which accommodates rods up to 15 mm in diameter. Attaches to rods up to 15mm in diameter. Pvc coating can withstand heat up to 100C for short periods of time but it is recommended you remove the PVC coating for extreme temperature uses.

Extends out approximately 5" from rod, not adjustable. Jaws have a capacity of 90 mm.

Thomas Traceable Kangaroo Thermometer, 7.5" Probe Length, -58 to 572 degree F, -50 to 300 degree C

The unit has a built-in compartment to hold the cable when not in use. The 7. 5"stainless-steel probe has a diameter of 0125" and is resistant to most chemicals. The thermometer is traceable to national Institute of Standards and Technology standards, indicating that it is calibrated to International Organization for Standardization ISO 17025 levels.

Calibrated to iso 17025 traceability standards for reliability of measurements. The lcd display has 075"-high digits for increased visibility. Can mount vertical or horizontal -- rotates on clamp. Digital thermometers are used in a wide range of applications, including in laboratory settings, food service and storage, and in doctors' offices and hospitals.

Thomas scientific manufactures lab supplies, equipment, chemicals, and instruments for scientific research. A microcontroller inside the thermometer measures this electrical conductivity and converts it to a temperature, which is displayed on an LCD. Pvc coating can withstand heat up to 100C for short periods of time but it is recommended you remove the PVC coating for extreme temperature uses.

Extends out approximately 5" from rod, not adjustable. The company was founded in 1899 and is headquartered in Philadelphia, PA.

Laboy ASCS002440S Polyacetal Conical Joint Clips for 24/40 or 24/29 Standard Taper Glass Joint Pack of 10

Lcd with 075" digits for increased visibility. Calibrated to iso 17025 traceability standards for reliability of measurements. For 24/29, 24/40 standard taper joint. 7. 5" stainless-steel probe is resistant to most chemicals. Dual-range digital thermometer for measuring temperature in test-tubes, beakers, and other laboratory equipment.

Made of polyacetal. Can mount vertical or horizontal -- rotates on clamp. Made of polyacetal, withstand temperatures up to 302 ° F 150 ° C, not resistant to the corrosive gases. Pack of 10 Pvc coated jaws open to 3. 5" or 90mm. Withstand temperatures up to 302F 150C. Used to connect a 24#the largest diameter for the joint is 24mm inner taper joint and a 24# outer taper joint.

. Attaches to rods up to 15mm in diameter. Measures temperature from -50 to 300 degrees c -58 to 572 degrees F, with an accuracy of + or - 1 degree C between -30 and 250 degrees C. Pvc coating can withstand heat up to 100C for short periods of time but it is recommended you remove the PVC coating for extreme temperature uses.

Extends out approximately 5" from rod, not adjustable.

Laboy ASS402440S Glass Penny Head Hollow Glass Stopper for 24/40 Outer Glass Joint Pack of 5

Lcd with 075" digits for increased visibility. 7. 5" stainless-steel probe is resistant to most chemicals. Not resistant to the corrosive gases. Dual-range digital thermometer for measuring temperature in test-tubes, beakers, and other laboratory equipment. For 24/40 grounded interchangeable joint. For 24/29, 24/40 standard taper joint.

Pack of 10 Attaches to rods up to 15mm in diameter. Penny-head joint stopper. Made of polyacetal. Pvc coated jaws open to 3. 5" or 90mm. Withstand temperatures up to 302F 150C. Pack of 5. Can mount vertical or horizontal -- rotates on clamp. Calibrated to iso 17025 traceability standards for reliability of measurements.

Hollow glass stopper. Pvc coating can withstand heat up to 100C for short periods of time but it is recommended you remove the PVC coating for extreme temperature uses. Extends out approximately 5" from rod, not adjustable. Measures temperature from -50 to 300 degrees c -58 to 572 degrees F, with an accuracy of + or - 1 degree C between -30 and 250 degrees C.

Laboy HMF011337 Glass 1000 mL 2 Neck Round Bottom Boiling Flask with 24/40 Center and Side Joints Angled

With 2 necks having the same joints laboy glass flasks are heavy wall designed, made of high-quality borosilicate glass and annealed at 800 degree Celsius, made by hand-blowing to ensure uniform wall thickness, can be heated directly in an open flame and can withstand typical laboratory thermal variations in Chemistry processes like heating and cooling.

Lcd with 075" digits for increased visibility. Pvc coating can withstand heat up to 100C for short periods of time but it is recommended you remove the PVC coating for extreme temperature uses. Extends out approximately 5" from rod, not adjustable. For 24/40 grounded interchangeable joint. Round bottom flask.

Attaches to rods up to 15mm in diameter. Hollow glass stopper. With 24/40 center joint and 24/40 side joint. Penny-head joint stopper. 7. 5" stainless-steel probe is resistant to most chemicals. Pack of 10 Pvc coated jaws open to 3.

Laboratory Grade Metalware Set - Support Stand 8" x 5", 12mm Dia. Rod 24" L, Cork Lined Burette Clamp with Boss Head and Retort Ring 2.5" dia

For 24/29, 24/40 standard taper joint. Can mount vertical or horizontal -- rotates on clamp. Perfect setup for a lab. Everything is in one box. Pack of 10 Pvc coating can withstand heat up to 100C for short periods of time but it is recommended you remove the PVC coating for extreme temperature uses. Extends out approximately 5" from rod, not adjustable.

Withstand temperatures up to 302F 150C. Round bottom flask. Attaches to rods up to 15mm in diameter. Penny-head joint stopper. Laboratory grade metalware set - support Stand 8" x 5", Rod 24" L, Burette Clamp and Retort Ring 2. 5" dia1 base, rod clamp and ring, 1 retort ringthis premium set includes a stand, 1 Burette Clamp, 1 Clamp, 1 Rod, all in one packages - eliminating the need to piece together a system for your classroom or lab.

With 24/40 center joint and 24/40 side joint. 2 neck angled. Pack of 5. Made from high-quality metal and built to last. Calibrated to iso 17025 traceability standards for reliability of measurements. Hollow glass stopper.

American Educational 7-G15-A Cast Iron Support Ring Stand with Acid Resistant Finish, 8" Length x 5" Width Base Size

For 24/29, 24/40 standard taper joint. Pack of 10 Lcd with 075" digits for increased visibility. With 24/40 center joint and 24/40 side joint. Hollow glass stopper. Made by hand blowing. Calibrated to iso 17025 traceability standards for reliability of measurements. Stainless steel rod 24" length. The rods are nickel plated steel and are threaded to fit the base.

Base size: 8" length by 5" width, rod size: 3/8" diameter by 20" length. Pvc coating can withstand heat up to 100C for short periods of time but it is recommended you remove the PVC coating for extreme temperature uses. Extends out approximately 5" from rod, not adjustable. Attaches to rods up to 15mm in diameter.

2 neck angled. Blue or black powder coated support stand base 8" x 5". Pack of 5. Pvc coated jaws open to 3. 5" or 90mm. Metal retort ring 2. 5" diameter. Type is coated with an acid resistant finish.

Lucksender 2pcs 110*60mm Laboratory Flask Cork Stand Lab Supply Article

Coated with an acid resistant finish. Pack of 5. Lcd with 075" digits for increased visibility. Made of polyacetal. For 24/40 grounded interchangeable joint. Strong and dependable support. 7. 5" stainless-steel probe is resistant to most chemicals. Attaches to rods up to 15mm in diameter. Stainless steel rod 24" length.

Made of cast iron. Penny-head joint stopper. Dual-range digital thermometer for measuring temperature in test-tubes, beakers, and other laboratory equipment. Pack of 10 The rods are nickel plated steel and are threaded to fit the base. Applied to make a flask stand to prevent falling. Waterproof and acid-alkli resistant.

With approx. Blue or black powder coated support stand base 8" x 5". Measures temperature from -50 to 300 degrees c -58 to 572 degrees F, with an accuracy of + or - 1 degree C between -30 and 250 degrees C. Waterproof and acid-alkli resistant. Hollow glass stopper. Description 110*60mm laboratory flask Cork Stand Lab Supply Article Applied to make a flask stand to prevent falling.

7pcs PTFE magnetic stirrer mixer stir bar White Color

2 neck angled. Ship by epacket with tracking number, take 7-17 days. Pvc coating can withstand heat up to 100C for short periods of time but it is recommended you remove the PVC coating for extreme temperature uses. Extends out approximately 5" from rod, not adjustable. Made by hand blowing. Lcd with 075" digits for increased visibility.

Measures temperature from -50 to 300 degrees c -58 to 572 degrees F, with an accuracy of + or - 1 degree C between -30 and 250 degrees C. 4 pronged, cork lined burette clamp. Applied to make a flask stand to prevent falling. Waterproof and acid-alkli resistant. With approx. Metal retort ring 2. 5" diameter. For 24/40 grounded interchangeable joint.

Round bottom flask. Made by hand blowing. Hollow glass stopper. Perfect setup for a lab. Blue or black powder coated support stand base 8" x 5".

Laboy Glass Vacuum Take off Adapter Bent Short Stem With 24/40 Joints

The rods are nickel plated steel and are threaded to fit the base. For 24/40 grounded interchangeable joint. Made of cast iron. Pvc coating can withstand heat up to 100C for short periods of time but it is recommended you remove the PVC coating for extreme temperature uses. Extends out approximately 5" from rod, not adjustable.

Coated with an acid resistant finish. Short stem adapter. Pvc coated jaws open to 3. 5" or 90mm. Calibrated to iso 17025 traceability standards for reliability of measurements. 2 neck angled. Measures temperature from -50 to 300 degrees c -58 to 572 degrees F, with an accuracy of + or - 1 degree C between -30 and 250 degrees C.

Dual-range digital thermometer for measuring temperature in test-tubes, beakers, and other laboratory equipment. Applied to make a flask stand to prevent falling. Waterproof and acid-alkli resistant. With approx. This short stem 105¡ã bent take off adapter with sealed-in drip tip is used to connect a condenser to a receiving flask for vacuum distillation.

With 10mm serrated hose connection, fit with 8mm I. D.