Ring Terminal Marine Grade – 25 per Package * PLEASE CHOOSE GAUGE AND STUD SIZE NEEDED * – Adhesive Lined Heat Shrink

Heat shrink insulator with Adhesive to Seal Connection for Vibration and Strain Relief. Made in usa! Ring terminal marine grade - adhesive Lined Heat Shrink - 25 per Package Tinned copper Designed for Harsh Marine Environment. Ul listed.

Marine Grade Wire & Battery Cable 18 AWG – 4/0 AWG and Spool Sizes

Ancors proprietary premium vinyl insulation stays flexible even in extreme cold and resists salt water, oil, battery acid, gasoline and ultra-violet radiation. Ultra flexible Type 3 stranding resists fatigue due to vibration and flexing. Exclusive insulation is rated at 600V, 105 DegreesC dry and 75 DegreesC wet, and is resistant to heat and abrasion.

Features: ancor marine grade wire is manufactured from tinned copper stranding for maximum protection against corrosion and electrolysis. Black 1/0 awg battery Cable - 100'. Exceeds all ul 1426, us coast guard charter boat cfr title 46 and ABYC standards Features: ancor marine Grade wire is manufactured from tinned copper stranding for maximum protecti.

.

Ancor Heat Shrink Ring Terminals

Tinned for corrosion resistance. Pure copper for maximum current flow. Ul listed and CSA recognized. F/125 deg. Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief. Wire range: 16-14 mm: 1-2 features: ancor marine Grade wire is manufactured from tinned copper stranding for maximum protecti.

Adhesive lined heat shrink ring terminalsgauge size: 16-14screw Size: #8Quantity: 100Product Features: Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC. Shrinks to form a water tight seal and the ultimate vibration and strain relief. Tinned for corrosion resistance, Pure copper for maximum current flow.

Heat activated adhesive built into the sleeve of the heat shrink tubing. Brazed seam for maximum strength. Nylon insulator, preferred by experts, oil, water, for Marine Grade resistance to sunlight, chemicals, vibration and cut-through damage. Shrinks at 257 deg. C to 110 deg. C. Operating temperature range 40 deg.

.

Blue Sea Systems Common BusBars 100A-250A

8 screw, 22-18 awg, 3 pack of Heat Shrink Ring Terminals. Ul listed and CSA recognized. Heat activated adhesive built into the sleeve of the heat shrink tubing. Features: ancor marine Grade wire is manufactured from tinned copper stranding for maximum protecti. Shrinks to form a water tight seal and the ultimate vibration and strain relief.

Tinned for corrosion resistance, Pure copper for maximum current flow.

Ancor Marine Grade Heavy-duty Lugs

8 screw, 22-18 awg, 3 pack of Heat Shrink Ring Terminals. Heat activated adhesive built into the sleeve of the heat shrink tubing. Features: ancor marine Grade wire is manufactured from tinned copper stranding for maximum protecti. Shrinks to form a water tight seal and the ultimate vibration and strain relief.

Tinned for corrosion resistance, Pure copper for maximum current flow. Ul listed and CSA recognized.

Blue Sea Systems ST Blade ATO/ATC Fuse Blocks

Blue Sea Systems. Ul listed and CSA recognized. 5026. 8 screw, 22-18 awg, 3 pack of Heat Shrink Ring Terminals. Heat activated adhesive built into the sleeve of the heat shrink tubing. Shrinks to form a water tight seal and the ultimate vibration and strain relief. Tinned for corrosion resistance, Pure copper for maximum current flow.

5026st blade fuse block w/ cover12 circuit w/ negative busclear insulating cover with label recesses accept small Format LabelsCover Satisfies ABYC/USCG requirements for insulationTin-plated copper buses and fuse clips give 30 Amperes rating per circuitAccepts ATO and ATC fast acting blade fuses20 write-on circuit labels included Features: ancor marine Grade wire is manufactured from tinned copper stranding for maximum protecti.

.

25 per Package * PLEASE CHOOSE GAUGE SIZE * - Adhesive Lined Heat Shrink - Female Disconnect Marine Grade

8 screw, 22-18 awg, 3 pack of Heat Shrink Ring Terminals. Ul listed. Shrinks to form a water tight seal and the ultimate vibration and strain relief. Tinned for corrosion resistance, Pure copper for maximum current flow. 5026. Made in usa! Heat shrink insulator with Adhesive to Seal Connection for Vibration and Strain Relief.

. Ul listed and CSA recognized. Heat activated adhesive built into the sleeve of the heat shrink tubing. Female disconnect marine grade - adhesive Lined Heat Shrink - 25 per Package Features: ancor marine Grade wire is manufactured from tinned copper stranding for maximum protecti. Blue Sea Systems. Tinned copper Designed for Harsh Marine Environment.

.

A81214 - Butt Connector Marine Grade - Adhesive Lined Heat Shrink - 25 Pack - 16-14 AWG

Made in usa! Shrinks to form a water tight seal and the ultimate vibration and strain relief. Tinned for corrosion resistance, Pure copper for maximum current flow. Tinned copper Designed for Harsh Marine Environment. Ul listed. Butt connector marine grade - adhesive lined heat shrink - 16-14 AWG - 25 Pack Features: ancor marine Grade wire is manufactured from tinned copper stranding for maximum protecti.

5026. Heat activated adhesive built into the sleeve of the heat shrink tubing. Ul listed and CSA recognized. Heat shrink insulator with Adhesive to Seal Connection for Vibration and Strain Relief. Heat shrink insulator with Adhesive to Seal Connection for Vibration and Strain Relief. 8 screw, 22-18 awg, 3 pack of Heat Shrink Ring Terminals.

Ul listed. Blue Sea Systems. Made in usa! Tinned copper Designed for Harsh Marine Environment.

Ancor Marine Grade Duplex and Triplex Wire

8 screw, 22-18 awg, 3 pack of Heat Shrink Ring Terminals. Exclusive insulation is rated at 600 Volts. Shrinks to form a water tight seal and the ultimate vibration and strain relief. Tinned for corrosion resistance, Pure copper for maximum current flow. Blue Sea Systems. Ul listed. Ancor marine grade wire products are the longest lasting and most rugged available, exceeding UL 1426, ABYC and US Coast Guard Charter boat CFR Title 46 standards.

Features: ancor marine Grade wire is manufactured from tinned copper stranding for maximum protecti. Made in usa!5026. Manufactured from individual copper strands and tinned to perform in the harshest marine environments. Ultra-flexible type 3 stranding resists fatigue from vibration and provides added corrosion protection.

Exceeds all ul 1426, us coast guard charter boat CFR title 46 and ABYC standards. Heat shrink insulator with Adhesive to Seal Connection for Vibration and Strain Relief. Heat shrink insulator with Adhesive to Seal Connection for Vibration and Strain Relief. Tinned copper Designed for Harsh Marine Environment.

Ul listed.

SELTERM UL Listed Marine Grade Heavy Duty Tinned Copper Lugs

Made in usa! Selterm marine grade copper Lugs are manufactured using industry leading processes to guarantee a high-quality product. Ul tested & Approved. 5026. The battery Cable lugs meet S. A. E conductivity standards and are tested to UL 486 with voltage rating of up to 600 V. Heat shrink insulator with Adhesive to Seal Connection for Vibration and Strain Relief.

Made in usa! Ul listed. Heat shrink insulator with Adhesive to Seal Connection for Vibration and Strain Relief. Can be Crimped or Soldered. Exclusive insulation is rated at 600 Volts. Made from 100% annealed Tinned Copper for Max Current Flow. To ensure corrosion resistance the tin-plated lugs are salt spray tested to ASTM B 117.

Ul listed and CSA recognized. Manufactured from individual copper strands and tinned to perform in the harshest marine environments. Ultra-flexible type 3 stranding resists fatigue from vibration and provides added corrosion protection. Exceeds all ul 1426, us coast guard charter boat CFR title 46 and ABYC standards.

Shrinks to form a water tight seal and the ultimate vibration and strain relief.

Adhesive Lined Heat Shrink - 25 Pack - Butt Connector Marine Grade - A81218 - 12-10 AWG

Ul listed. Manufactured from individual copper strands and tinned to perform in the harshest marine environments. Ultra-flexible type 3 stranding resists fatigue from vibration and provides added corrosion protection. Exceeds all ul 1426, us coast guard charter boat CFR title 46 and ABYC standards. Heat shrink insulator with Adhesive to Seal Connection for Vibration and Strain Relief.

Heat activated adhesive built into the sleeve of the heat shrink tubing. Corrosion free Ideal for Marine Automotive or Outdoor Use. Ul listed and CSA recognized. Heat shrink insulator with Adhesive to Seal Connection for Vibration and Strain Relief. 5026. Ul listed. Blue Sea Systems. Can be Crimped or Soldered. Butt connector marine grade - adhesive lined heat shrink - 12-10 AWG - 25 Pack Features: ancor marine Grade wire is manufactured from tinned copper stranding for maximum protecti.

Exclusive insulation is rated at 600 Volts. Made from 100% annealed Tinned Copper for Max Current Flow. Shrinks to form a water tight seal and the ultimate vibration and strain relief.