VIAIR 95900 Compressor Mounting Bracket

Compressor mounting Bracket - Sold individually Suspension Parts. Model number: 95901. Air compressor Kits and Components. Black.


Viair 90150 0-200 PSI Air Pressure Regulator

Regulate air pressure at any point between 0 PSI and 200 PSI. Mounting bracket included. Viair inline pressure regulator may be used to regulate air pressure from an air tank to any pressure between 0 to 200 PSI. The regulator also provides an easy-to-read gauge that allows adjustment of inline pressure, a compression fitting for tank pressure side and a t-fitting that will allow regulated pressure to be fed to two locations.

Great for adjusting pressure for air locking differentials. This is useful for installations that supply air to locking differentials and air tools. Locking adjustment dial. Includes the following brass fittings - t-fitting 1/4 inch npt female x 1/4 inch NPT female x 1/4 inch NPT male, compression fitting for 1/4 inch air line, 1/4 inch NPT Plug.

.


VIAIR 200 PSI Ultra Duty Onboard Air System

Intended for inflation of tires up to 37 inches or to actuate air horns that require 200PSI. Mounting bracket included. Features permanent magnetic motor and 100 PSI pressure. Includes the essential components to install an onboard air system: 480C Air compressor, air tank fittings, pressure switch, relay, 2.

5 gallon air tank, air line and wiring. 200 psi maximum working pressure, 1. 76 cfm @ 0 psi. Great for adjusting pressure for air locking differentials. Can inflate a 37 inch tire from 0-30PSI in 7 minutes and 10 seconds. One year manufacturer's defect warranty through manufacturer with receipt. Viair 200 psi ultra duty onboard air system is a pre-packaged compressed air solution that provides an industry-leading, 480C compressor, 100 percent duty cycle, 200 PSI rated, 2.

5 gallon air tank and all components needed to install a working system capable of inflating tires. Regulate air pressure at any point between 0 PSI and 200 PSI. Includes the following brass fittings - t-fitting 1/4 inch npt female x 1/4 inch NPT female x 1/4 inch NPT male, compression fitting for 1/4 inch air line, 1/4 inch NPT Plug.

Air tank should be used with a drain cock and pressure release valve. Locking adjustment dial.


Viair 90007 Air Source Relocation Kit

Hose clamps with fastening screws included. Regulate air pressure at any point between 0 PSI and 200 PSI. Quick connect stud 1/4 inch Female NPT included. Locking adjustment dial. Air tank should be used with a drain cock and pressure release valve. 15 feet length of air line included to remotely mount a quick connect coupler.

Quick connect coupler 1/4 inch Female NPT included. Two brass 1/4 inch npT compression fittings for 1/4 inch airline included. Mounting bracket included. Can inflate a 37 inch tire from 0-30PSI in 7 minutes and 10 seconds. One year manufacturer's defect warranty through manufacturer with receipt. Includes the essential components to install an onboard air system: 480C Air compressor, pressure switch, relay, air tank fittings, 2.

5 gallon air tank, air line and wiring. 200 psi maximum working pressure, 1. 76 cfm @ 0 psi. Great for adjusting pressure for air locking differentials. Viair air source relocation Kit allows you to install a remote quick connect port anywhere on your vehicle. Comes with air line, compression fittings and quick connects to get the job done.




Viair 90005 Tank Port Fittings Kit

Quick connect stud 1/4 inch Female NPT included. Includes the essential components to install an onboard air system: 480C Air compressor, relay, pressure switch, air tank fittings, 2.5 gallon air tank, air line and wiring. 200 psi maximum working pressure, 1. 76 cfm @ 0 psi. Viair 5 piece tank port fittings kit for onboard air systems includes two 1/4 inch plugs, drain cock, compression fitting, and 175 PSI safety valve.

Hose clamps with fastening screws included. All brass construction. Includes the following brass fittings - t-fitting 1/4 inch npt female x 1/4 inch NPT female x 1/4 inch NPT male, compression fitting for 1/4 inch air line, 1/4 inch NPT Plug. Two brass 1/4 inch npT compression fittings for 1/4 inch airline included.

Locking adjustment dial. Great for adjusting pressure for air locking differentials. Air tank should be used with a drain cock and pressure release valve. 15 feet length of air line included to remotely mount a quick connect coupler. Quick connect coupler 1/4 inch Female NPT included. Thread sealant is recommended for use with all brass fittings.




VIAIR Heavy Duty Onboard Air System

Locking adjustment dial. Mounting bracket included. Regulate air pressure at any point between 0 PSI and 200 PSI. Intended for inflation of tires up to 37 inches or to actuate air horns that require 200PSI. Thread sealant is recommended for use with all brass fittings. 150 psi maximum working pressure and 33% duty cycle.

Quick connect stud 1/4 inch Female NPT included. Designed to be installed and mounted onto the vehicle. Includes all parts needed for installation of you very own onboard air solution for tire maintenance and small pneumatic tools. 33 percent duty cycle and 2. 54 cfm maximum flow. All brass construction. Viair heavy duty onboard air system for 35" tires is a pre-packaged compressed air solution that provides a faster, 33 percent duty cycle, 400C compressor, 2.

5 gallon air tank, and all components needed to install a working system capable of inflating tires. Features a permanent magnetic motor mount and 33 percent duty cycle and has an 100 PSI pressure. Two brass 1/4 inch npT compression fittings for 1/4 inch airline included. Hose clamps with fastening screws included.

Always use a drain cock and a safety release valve when installing an onboard air system.


Viair 45040 450C Air Compressor Kit

Great for adjusting pressure for air locking differentials. 12 volt - 150psi max working pressure, Engine Must Be Running During Use. Includes the essential components to install an onboard air system: 480C Air compressor, pressure switch, relay, air tank fittings, 2.5 gallon air tank, air line and wiring.

200 psi maximum working pressure, 1. 76 cfm @ 0 psi. Intended for inflation of tires up to 37 inches or to actuate air horns that require 200PSI. Mounting bracket included. Thread sealant is recommended for use with all brass fittings. Quick connect coupler 1/4 inch Female NPT included. 33 percent duty cycle and 2.

54 cfm maximum flow. Two brass 1/4 inch npT compression fittings for 1/4 inch airline included. 150 psi maximum working pressure and 33% duty cycle. Designed to be installed and mounted onto the vehicle. Includes all parts needed for installation of you very own onboard air solution for tire maintenance and small pneumatic tools.

Intended for inflation of tires up to 35 inches. Locking adjustment dial.


VIAIR 90111 Pressure Switch with Relay

Pressure switch with relay, 110 psi on, 1/8in npt m port, 150 Psi Off Regulate air pressure at any point between 0 PSI and 200 PSI. Includes the following brass fittings - t-fitting 1/4 inch npt female x 1/4 inch NPT female x 1/4 inch NPT male, compression fitting for 1/4 inch air line, 1/4 inch NPT Plug.

Remote mount air filter assembly sealed compressor. Intended for inflation of tires up to 37 inches or to actuate air horns that require 200PSI. 33 percent duty cycle and 2. 54 cfm maximum flow. Pressure range 110 psi On and 145 PSI Off. 100 percent duty cycle. For 12 volt systems. Includes the essential components to install an onboard air system: 480C Air compressor, relay, air tank fittings, pressure switch, 2.

5 gallon air tank, air line and wiring. 200 psi maximum working pressure, 1. 76 cfm @ 0 psi. Quick connect stud 1/4 inch Female NPT included. Locking adjustment dial. Kit includes two 1/4 inch plugs, drain cock, compression fitting, and 175 PSI safety valve.


E Support Car Blue LED Compressor Light Toggle Switch

Dc 12v/20a 24v/10a. Package include: 1 x blue led switch regulate air pressure at any point between 0 PSI and 200 PSI. 12 volt - 150psi max working Pressure, engine must be running during use. 1. 66 cfm free flow @ 0 psi, 100% duty cycle at 100PSI & 72 degree ambient temperature. 5 pins with led lamp, on /OFF.

Material: abs & Environmental anti-retardant materials. 33 percent duty cycle and 2. 54 cfm maximum flow. Includes the following brass fittings - t-fitting 1/4 inch npt female x 1/4 inch NPT female x 1/4 inch NPT male, compression fitting for 1/4 inch air line, 1/4 inch NPT Plug. Always use a drain cock and a safety release valve when installing an onboard air system.

Kit includes two 1/4 inch plugs, compression fitting, drain cock, and 175 PSI safety valve. All fittings are 1/4 inch NPT. Universal fitting, will fit most cars. For 12 volt systems. Two brass 1/4 inch npT compression fittings for 1/4 inch airline included. Quick connect stud 1/4 inch Female NPT included. Designed to be installed and mounted onto the vehicle.




Viair 92820 6 Port Manifold with Mounting Holes

Mounting bracket included. Material: abs & Environmental anti-retardant materials. Designed to be installed and mounted onto the vehicle. Includes all parts needed for installation of you very own onboard air solution for tire maintenance and small pneumatic tools. Please consult manufacturer's website for wiring diagram.

Remote mount air filter assembly sealed compressor. Intended for inflation of tires up to 37 inches or to actuate air horns that require 200PSI. Hose clamps with fastening screws included. 100 percent duty cycle. Cfm @ 0 psi - 1. 66 / cfm @ 100 psi - 094. Dc 12v/20a 24v/10a. Two brass 1/4 inch npT compression fittings for 1/4 inch airline included.

Pressure sensor connects via 1/8" NPT M Port. Quick connect stud 1/4 inch Female NPT included. Quick connect coupler 1/4 inch Female NPT included. All brass construction. Thread sealant is recommended for use with all brass fittings.


Viair 93940 40 Amp Air Compressor Relay for 12 Volt compressor

Intended for inflation of tires up to 37 inches or to actuate air horns that require 200PSI. Locking adjustment dial. 40 amp 12v relay with Mounting Tabs. Thread sealant is recommended for use with all brass fittings. Intended for inflation of tires up to 35 inches. Universal fitting, will fit most cars. Includes the essential components to install an onboard air system: 480C Air compressor, relay, pressure switch, air tank fittings, 2.

5 gallon air tank, air line and wiring. 200 psi maximum working pressure, 1. 76 cfm @ 0 psi. Remote mount air filter assembly sealed compressor. Always use a drain cock and a safety release valve when installing an onboard air system. Includes Mounting Bracket And Hardware. Designed to be installed and mounted onto the vehicle.

Includes all parts needed for installation of you very own onboard air solution for tire maintenance and small pneumatic tools. Material: abs & Environmental anti-retardant materials. Each compressor must have its own relay for a proper installation. Kit includes 450c compressor, air line for remote mounting air filter, freeze-resistant wiring, remote mount air filter assembly, mounting hardware with vibration isolators, heavy duty terminals and more.